Category Engineering | AskTOP.net – Leader Development for Army Professionals

Engineering

EP 1110-2-9 Hydrologic Engineering Study Design

Purpose: a. Current planning and management guidance for civil works studies requires careful technical activity management. Hydrologic engineering is a critical item, especially for feasibility investigations. b. Successful study completion requires management of time, money, and human resources to accomplish …Read More

Article by

EP 1110-2-8 Explaining Flood Risk

FOREWORD: Floods are the most frequent natural disaster in the United States and cause large losses of life and property. The problem is worsening as population growth and urbanization outpace implementation of flood loss reduction measures. A key reason for …Read More

Article by

EP 1110-2-7 Hydrologic Risks

Foreword:  One of the goals of the U.S. Army Corps of Engineers is to mitigate, in an economically efficient manner, damage due to floods.  Assessment of the risk of flooding is a critical step in deciding how best to accomplish …Read More

Article by
Army Counseling Software - Include over 250 Army Counseling Examples
Wear it Right! Army Uniform Guide

EP 1110-2-14 Monograph Prepared by M. Petersen on Inland Navigation and Canalization

Purpose: This pamphlet disseminates a monograph compiled by Margaret Sara Petersen, Emerita Associate Professor, Department of Civil Engineering and Engineering Mechanics, the University of Arizona.

Article by

EP 1110-2-13 Dam Safety Preparedness

Purpose: This pamphlet provides general guidance and information concerting dam safety preparedness within the Corps of Engineers.

Article by

EP 1110-2-11 Ice Jams Flooding Causes and Possible Solutions

Purpose: This pamphlet disseminates the results of research conducted by the U.S. Army Corps of Engineers Cold Regions Research and Engineering Laboratory on the causes and possible solutions to ice jam flooding problems.

Article by
The comprehensive guide to the Military Decision Making Process (MDMP)
Get Tabbed - How to Graduated Army Ranger School

EP 1110-2-10 Hydrologic Engineering Analysis Concepts for Cost-Shared Flood Damage Reduction Studies

Purpose: a. This publication describes study processes performed by U.S. Army Corps of Engineers (USACE) hydrologic engineers for Federal flood damage reduction project. The goal is to enable Corps staff and cost-share partners to gain an understanding of hydrologic engineering …Read More

Article by

EP 1110-1-9 Liquid Limit Grooving Tools

Purpose: The purpose of this pamphlet is to advise field offices of the availability and source of plastic liquid limit grooving tools, meeting Corps of Engineers specifications.

Article by

EP 1110-1-33 Spill Reporting Procedures for USACE Hazardous Toxic and Radioactive Waste Projects

Purpose: This pamphlet is intended to support: (i) the USACE policy for the prevention, control, reporting, and contingency planning for spills of oil and hazardous substances; and (ii) the USACE goal to use, generate, transport, store, handle, and dispose of …Read More

Article by

EP 1110-1-32 Electromagnetic Pulse EMP and Tempest Protection for Facilities

Purpose: This pamphlet provides information on the capabilities and potential uses of the Site Characterization and Analysis Penetrometer System (SCAPS) direct-push technology for the investigation of hazardous, toxic, and radioactive waste (HTRW) sites.

Article by

EP 1110-1-31 Combined Lead Inspection Risk Assessment for Target Housing Property Transfer – Standard Scope of Work

Purpose: The standard Scope of Work (SOW) described in this Engineer Pamphlet (EP) provides a framework for developing site- and project-specific scope of work for completion of lead inspections/ risk assessments for DA property transfers.

Article by

EP 1110-1-30 Pre-Design Lead Abestos Survey – Standard Scope of Work

Purpose: The standard Scope of Work (SOW) described in this Engineer Pamphlet (EP) provides a framework for developing project-specific scope of work to complete pre-design lead/asbestos surveys preliminary to DA project design.

Article by