Category Engineering | AskTOP.net – Leader Development for Army Professionals

Engineering

EM 1110-2-2502 Retaining and Flood Walls

Purpose: This manual provides guidance for the safe design and economical construction of retaining and flood walls. This manual is intended primarily for retaining walls which will be subjected to hydraulic loadings such as flowing water, submergence, wave action, and …Read More

Article by

EM 1110-2-2400 Structural Design and Evaluation of Outlet Works

Purpose:  This manual provides guidance for the planning and structural design and analysis of intake structures and other outlet works features used on U.S. Army Corps of Engineers projects of flood control, water supply, water quality and temperature control, recreation, …Read More

Article by

EM 1110-2-2302 Construction with Large Stone

Purpose: This manual establishes criteria and presents guidance for the selection, evaluation, and use of large-stone materials in construction.

Article by
Army Counseling Software - Include over 250 Army Counseling Examples
The Board Master - Army Promotion Board Study Guide

EM 1110-2-2301 Test Quarries and Test Fills

Purpose: This manual establishes criteria and provides guidance for the investigations preceding test quarries, for the development of test quarries, and for the planning and conduct of compacted test fill programs at civil works projects.

Article by

EM 1110-2-2300 General Design and Construction Considerations for Earth and Rock Fill Dams

Purpose: This manual presents fundamental principles underlying the design and construction of earth and rock-fill dams. The general principles presented herein are also applicable to the design and construction of earth levees. The construction of earth dams by hydraulic means …Read More

Article by

EM 1110-2-2201 Arch Dam Design

Purpose: This manual provides information and guidance on the design, analysis, and construction of concrete arch dams.

Article by
Master Army Promotions Boards - App for iOS
Company Command: The Bottom Line - Army Leadership Guide

EM 1110-2-2200 Gravity Dam Design

Purpose: The purpose of this manual is to provide technical criteria and guidance for the planning and design of concrete gravity dams for civil works projects.

Article by

EM 1110-2-2105 Design of Hydraulic Steel Structures

Purpose: This manual prescribes guidance for designing hydraulic steel structures (HSS) by load and resistance factor design (LRFD) and guidance for fracture control. Allowable stress design (ASD) guidance is provided as an alternative design procedure or for those structure types …Read More

Article by

EM 1110-2-2104 Strength Design for Reinforced Concrete Hydraulic Structures

Purpose: This manual provides guidance for designing reinforced-concrete hydraulic structures by the strength-design method.

Article by

EM 1110-2-2104 Change 1

This change 1 to EM 1110-2-2104, 30 June 1992, revised Table of Content and Chapter 3.  Also commentary for Chapter 3 is added.

Article by

EM 1110-2-2102 Waterstops and Other Preformed Joint Materials for Civil Works Structures

Purpose: This manual provides guidance for the selection and use of waterstops and other preformed joint materials for preventing passage of excessive amounts of water, water-borne matter, gases, other fluids, and other unwanted substances into or through the joints of …Read More

Article by

EM 1110-2-2100 Stability Analysis of Concrete Structures

Purpose: This manual establishes and standardizes stability criteria for use in the design and evaluation of the many various types of concrete structures common to Corps of Engineers civil works projects. As used in this manual, the term “stability” applies …Read More

Article by