Purpose: This regulation provides U.S. Army Corps of Engineers (USACE)-wide consistent criteria and requirements for developing design and engineering documents, such as design analysis, drawings and specifications, necessary for the construction of military construction (MILCON) and/or Hazardous, Toxic and Radioactive …Read More
Archive for 2011
ER 1110-345-53 Structural Steel Connections
Purpose: This regulation prescribes the policy and procedures for the design and approval of structural steel connections for military construction projects.
ER 1110-345-122 Interior Design
Purpose: This regulation establishes policy, requirements, and responsibilities to be followed in the planning, design, approval, and procurement of interior designs for construction and improvement projects.
ER 1110-345-100 Design Policy for Military Construction
Purpose: This regulation establishes policies, responsibilities, and procedures for the design of military facilities.
ER 1110-34-1 Transportation Systems – Mandatory Center of Expertise
Purpose: This regulation sets forth authority, policy, and responsibilities of the HQUSACE Transportation Systems Mandatory Center of Expertise (TSMCX). The TSMCX is established to support engineering, planning, design, construction, evaluation, criteria development, and real property requirements for all military transportation …Read More
ER 1110-3-1301 Hazardous Toxic and Radioactive Waste HTRW Cost Engineering
Purpose: This regulation provides specific policy and guidance for the development of remedial action and operation and maintenance cost estimates for all HTRW projects assigned to the U.S. Army Corps of Engineers (USACE). This regulation complements the general cost engineering …Read More
Is there a regulation that specifies the type of scale to be used during a unit weigh-in?
Sergeant Major, I am an AGR SFC. Upon arrival at my unit I was tagged with the position of First Sergeant. My question: During BN APFT's and weigh-ins, the scales we use to weigh Soldiers are floor scales purchased from Wal-Mart. Does any regulation list a standard for what type of scale is to be used? Every unit I have been in AC or as an AGR have used the same standard scales. .. Read the Answer»
Ye Olde Christmas Newsletter
Check your inbox for our Christmas Newsletter or click this link to read it in your web browser. Merry Christmas, folks. Have an excellent holiday. We have an exciting 2012 coming up on the site. The newsletter contains some details …Read More
Can I be reduced from E-6 to E4 for inefficency?
I am Active Duty with 13 years TIS. Can I be reduced from E6 to E4 for inefficiency? TDS advised me that I would only be reduced to E5 if the board felt the need, but the board recommended me to be reduced to E4. I am appealing and TDS is trying to get my rank reduced to E5 instead of E4. TDS highlighted AR 600-8-19 and FM 27-1 and their interpretation of the rules and had me take it to Brigade legal, but they said that you may be reduced more than one rank for inefficiency. So I am getting two different answers for this. Do you have any insight? I have another appointment tomorrow with TDS to try and get this resolved. Thank you... Read the Answer»
Do leaders have to be in the same uniform as the Soldier when conducting Corrective Training?
Does an NCO have to be in the same uniform as the Soldier when conducting corrective training? If so, can you send me the Army Regulation where I can find this information? .. Read the Answer»
ER 1110-3-1300 Military Programs Cost Engineering
Purpose: This regulation prescribes U.S. Army Corps of Engineers (USACE) cost engineering policies, requirements, and procedures for Military Programs. It provides guidance in the development and submission of cost estimates used in the Military Construction (MILCON) programs. In addition, it …Read More
Recent Articles
- I recently received an Article 15 and I am due to ETS in 2 months but my unit wants to chapter me. Can they do this?
- If I receive quarters for 24 hours when am I required to report to work?
- My chain of command frequently puts out information after 2000 hours is there anything I can do to get them to do it during formation or a reasonable hour?
- Is it true when a new leader takes over I get a fresh start and my previous counselings no longer matter?
- My wife is pregnant and I will be going to the gas chamber will it be safe for me to do it?
Recently Answered
- What action is taken when a Soldier marks disagree and provides a rebuttal statement?
- Can a Soldier flagged for over weight be deployed?
- I was in a motorcycle accident and my chain of command directed that I perform over 100 hours of riding mentorship before I can use my cycle again by myself. However no one will mentor me. What can I do?
- I have refused to get vaccinated for religious reasons. I am being told I will receive a dishonorable discharge. Is this true?
- I have a Soldier that arrived at the unit and the BN will not let the Soldier take PTDY for house hunting but they allow everyone else to do it. What can I do as the commander?
© 2025 AskTOP.net – Leader Development for Army Professionals. All rights reserved.
All materials contained on this site are protected by United States copyright law and may not be reproduced, distributed, transmitted, displayed, published, broadcast, or in any way exploited without the prior written permission of Mentor Enterprises, Inc. or in the case of third party materials, the owner of that content. You may not alter or remove any trademark, copyright or other notice from copies of the content.
What's this?
Ask Your Question
What's this?
AskTOP.com is a site to offer guidance and advice to Soldiers like yourself.Are you confronted with an ethical dilemma? Do you have a question about Army regulation? Need an outside opinion and don't know where to turn? You've come to the right place.
Simply fill out this form, and we'll get back to you as soon as we can.
Ask a Question