Purpose: This manual provides (a) guidance on the design and construction of conduits, culverts, and pipes. (b) design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, and internal/external fluid pressures. CLICK TO DOWNLOAD
Manuals
EM 1110-2-2901 Tunnels and Shafts in Rock
Purpose: This manual was prepared by CECW-ED and CECW-EG and provides technical criteria and guidance for the planning, design, and construction of tunnels and shafts in rock for civil works projects. Specific areas covered include geological and geotechnical explorations required, …Read More
EM 1110-2-2705 Structural Design of Closure Structures for Local Flood Protection Projects
Purpose: This engineer manual (EM) provides guidance for the structural design of closure structures for openings in levees and floodwalls of inland local flood protection projects (LFPPs). Design requirements for aluminum and steel stoplog closure structures and steel swing, miter, …Read More
EM 1110-2-2704 Cathodic Protection Systems for Civil Works Structures
Purpose and Scope: This manual provides guidance for the selection, design, installation, operation, and maintenance of cathodic protection systems (CPSs) used to supplement paint systems for corrosion control on civil works hydraulic structures. It also discusses possible solutions to some …Read More
EM 1110-2-2703 Lock Gates and Operating Equipment
Purpose: This manual provides guidance in the structural, mechanical, and electrical design of lock gates and operating equipment at navigation projects.
EM 1110-2-2702 Design of Spillway Tainter Gates
Purpose: This manual provides guidance for the design, fabrication, and inspection of spillway tainter gates, trunnion girder, and trunnion girder anchorage for navigation and flood control projects. Load and resistance factor design (LRFD) criteria is specified for design of steel …Read More
EM 1110-2-2701 Vertical Lift Gates
Purpose: The purpose of this manual is to provide guidance in the structural design of vertical lift gates.
EM 1110-2-2611 Engineering for Prefabricated Constructuin of Navigation Projects
Purpose: This manual provides guidance to help Districts in developing innovative plans to use precast concrete segments and other prefabricated elements for construction of navigation projects. The primary emphasis is on describing engineering activities necessary during the project development process …Read More
EM 1110-2-2610 Lock and Dam Gate Operating and Control Systems
Purpose: This manual provides guidance for the mechanical and electrical design of navigation lock and spillway gate operating and control systems for both new construction and the rehabilitation of existing projects. Operation, maintenance and inspection information as it relates to …Read More
EM 1110-2-2610 Change 1
This change to EM 1110-2-2610, 12 December 2003, adds a new paragraph, 4.7 Onsite Wireless Remote to Chapter 4.
EM 1110-2-2608 Navigation Locks Fire Protection Provisions
Purpose: This manual sets forth design criteria and procedures to be used for fire protection systems at USACE navigation locks. The fire hazards addressed herein are those presented by commercial vessels, tows, and recreational craft. The protection to be provided …Read More
EM 1110-2-2607 Planning and Designs of Navigation Dams
Purpose: This manual is issued for guidance of individuals and elements within the Corps of Engineers engaged in the structural planning, layout, and design of navigation dams for civil works projects. The structural design of gates is not covered in …Read More
Recent Articles
- I recently received an Article 15 and I am due to ETS in 2 months but my unit wants to chapter me. Can they do this?
- If I receive quarters for 24 hours when am I required to report to work?
- My chain of command frequently puts out information after 2000 hours is there anything I can do to get them to do it during formation or a reasonable hour?
- Is it true when a new leader takes over I get a fresh start and my previous counselings no longer matter?
- My wife is pregnant and I will be going to the gas chamber will it be safe for me to do it?
Recently Answered
- What action is taken when a Soldier marks disagree and provides a rebuttal statement?
- Can a Soldier flagged for over weight be deployed?
- I was in a motorcycle accident and my chain of command directed that I perform over 100 hours of riding mentorship before I can use my cycle again by myself. However no one will mentor me. What can I do?
- I have refused to get vaccinated for religious reasons. I am being told I will receive a dishonorable discharge. Is this true?
- I have a Soldier that arrived at the unit and the BN will not let the Soldier take PTDY for house hunting but they allow everyone else to do it. What can I do as the commander?
© 2024 AskTOP.net – Leader Development for Army Professionals. All rights reserved.
All materials contained on this site are protected by United States copyright law and may not be reproduced, distributed, transmitted, displayed, published, broadcast, or in any way exploited without the prior written permission of Mentor Enterprises, Inc. or in the case of third party materials, the owner of that content. You may not alter or remove any trademark, copyright or other notice from copies of the content.
What's this?
Ask Your Question
What's this?
AskTOP.com is a site to offer guidance and advice to Soldiers like yourself.Are you confronted with an ethical dilemma? Do you have a question about Army regulation? Need an outside opinion and don't know where to turn? You've come to the right place.
Simply fill out this form, and we'll get back to you as soon as we can.
Ask a Question