2011 | AskTOP.net – Leader Development for Army Professionals

Archive for 2011

EM 1110-2-1206 Environmental Engineering for Small Boat Basins

Purpose: The purpose of this manual is to incorporate environmental considerations into the planning, engineering, design, construction, operation, and maintenance of small boat basins. Much of this guidance is general in nature with many references to appropriate Corps manuals and …Read More

Article by

EM 1110-2-1205 Environmental Engineering and Local Flood Control Channels

Purpose: This manual provides guidance for incorporating environmental considerations in the planning, engineering, design, and construction of flood control channels, levees, and associated structures.

Article by

EM 1110-2-1204 Environmental Engineering for Coastal Shore Protection

Purpose. The purpose of this manual is to provide guidance in environmental engineering for coastal shore protection projects.

Article by
Army Counseling Software - Include over 250 Army Counseling Examples
Get Tabbed - How to Graduated Army Ranger School

EM 1110-2-1202 Environmental Engineering for Deep-Draft Navigation Projects

Purpose: This manual provided guidance for incorporating environmental considerations in the planning, engineering and design, as well as, construction, operation and maintenance of deep-draft navigation projects.

Article by

EM 1110-2-1201 Reservoir Water Quality Analyses

Purpose: This manual provides guidance for the assessment of reservoir water quality conditions, including reservoir pool, releases and tailwaters.

Article by

EM 1110-2-1009 Engineering and Design – Structural Deformation Surveying

Purpose: This manual provides technical guidance for performing precise structural deformation surveys of locks, dams, and other hydraulic flood control or navigation structures.  Accuracy, procedural, and quality control standards are defined for monitoring displacements in hydraulic structures.

Article by
Get Tabbed - How to Graduated Army Ranger School
Wear it Right! Army Uniform Guide

EM 1110-1-502 Technical Guidelines for Hazardous and Toxic Wast Treatment and Cleanup Activities

Purpose: This manual provides design guidelines that will aid U.S. Army Corps of Engineers Districts and Divisions in the selection of remedial actions at uncontrolled hazardous waste sites. These guidelines are to be used in support of the Department of …Read More

Article by

EM 1110-1-4016 Engineering and Design – Landfill Off-Gas Collection and Treatment Systems

Purpose and Scope: This EM establishes criteria and guidance for landfill off-gas collection and treatment systems.

Article by

EM 1110-1-4015 Errata Sheet 1

Errata Sheet No. 1 Engineering and Design IN-SITU THERMAL REMEDIATION EM 1110-1-4015 28 August 2009 Paragraph 10.2.1.2: The last four sentences of Paragraph 10.2.1.2 are hereby changed as contained in this Errata.

Article by

EM 1110-1-4012 Engineering and Design Precipitation Coagulation Flocculation

Purpose: Chemical precipitation is the most common technique used for treatment of metal-contaminated waters (Patterson and Minear 1975, EPA 625/8-80-003, EPA 600/8-80-042c, Peters et al. 1985, Patterson 1988). Chemical precipitation of heavy metals has long been used as the primary …Read More

Article by

EM 1110-1-4011 Construction Quality Assurance CQA Plan Requirements for Hazardous Waste Landfills

Purpose: This engineer manual transmits a document which describes CQA inspection requirements for hazardous waste landfill covers and liners. The appendix of this document is a template for landfill CQA plans to assist designers in incorporating the important aspects of …Read More

Article by

EM 1110-1-4010 Multi-Phase Extraction

Purpose. This Engineer Manual (EM) is intended to provide detailed guidance on all phases of remediation projects involving Multi-phase Extraction (MPE). This includes guidance on (1) the appropriate site characterization and pilot studies for MPE; (2) appropriate considerations in screening …Read More

Article by