Purpose: This aircrew training manual (ATM) standardizes aircrew training programs and flight evaluation procedures. This manual provides specific guidelines for executing H-60 aircrew training. It is based on the battle-focused training principles outlined in Field Manual (FM) 7-1. It establishes crewmember qualification, refresher, mission, and continuation training and evaluation requirements. This manual applies to all H-60 series crewmembers and their commanders. This is not a stand-alone document. All of the requirements of the Army regulations (ARs) and training circular (TC) 1-210 must be met. Implementing this manual conforms to AR 95-1 and TC 1-210. This manual, in conjunction with the ARs and TC 1-210, will help aviation commanders—at all levels—develop a comprehensive aircrew training program. By using the ATM, commanders ensure that individual crewmember and aircrew proficiency is commensurate with their units’ mission and that aircrews routinely employ standard techniques and procedures. Crewmembers will use this manual as a “how to” source for performing crewmember duties. It provides performance standards and evaluation guidelines so that crewmembers know the level of performance expected. Each task has a description that describes how it should be done to meet the standard. Standardization officers, evaluators, and unit trainers will use this manual and TC 1-210 as the primary tools to assist the commander in developing and implementing his aircrew training program. This publication applies to the Active Army, the Army National Guard/Army National Guard of the United States, and the U.S. Army Reserve unless otherwise stated. The proponent of this publication is the United States Army Training and Doctrine Command (TRADOC). Send comments and recommendations on Department of Army (DA) Form 2028 (Recommended Changes to Publications and Blank Forms) or automated link http://www.usapa.army.mil/da2028/daform2028.asp) through the aviation unit commander to Commander, U.S. Army Aviation Center, ATTN: ATZQ-TD (Flight Training Branch), Building 4507, Andrews Avenue, Fort Rucker, AL 36362-5263. Recommended changes may also be e-mailed to RUCK.ATZQ-TD@conus.army.mil. This publication implements portions of STANAG 3114. This publication has been reviewed for operations security considerations.
Pages: 1 2